5” - 1.9M Straight Britannia Track Panel

5 Inch Gauge Straight Britannia Semi-Permanent Track Panel 1.9m section.

 

Length of rail: 1.9M

 

Weight 11.2kg(approx)

 

Rail material: Flat bar steel (20x10mm) 7 x Sleepers: Solid recycled plastic 60x30mm profile 395mm long

 

Please note there is an approximately 3 week lead time on this product from payment till dispatch.

This listing is for a single track section, select the number of sections you require from the drop down menu, or contact us for large orders.

A standard track section weighs approximately 11.2kg and requires careful handling to avoid injury. Personal Protective Equipment (PPE)  should be used when laying or moving the track, for more advice please refer to  the ‘Operating Instructions for laying Britannia Track’ the full version can be found on MRW website. 

As standard all MRW 5” gauge Britannia track panels are widened by 1.6mm [ 1/16" ]. This allows for curves to be joined to straights. This widening is within the normal amount for 5 inch gauge standards and should also minimise wear of the root radius of rolling stock wheel profiles.

Assembling and Packing Britannia Track to Ensure it is Level

Britannia track panels are stronger than conventional profile track panels but still require a very level base for them to be laid upon. The track is designed to be sunk into ballast with appropriate foundations constructed. The track can be laid in a “temporary” fashion using wooden blocks for packing but it requires much more careful packing than our Jubilee track range as they are more flexible. Britannia track should be laid on a flat and level surface with minimal changes to gradient.Good groundwork must be used wherever the ground is uneven.

 

For a complete description of track laying, please refer to the ‘Operating Instructions for laying Britannia Track’ the full version can be found on MRW website.  Britannia Track, laid in hours, giving years of fun. 

 

It is the responsibility of the operator to ensure the products have been properly installed. Liberal application of waterproof grease on the contact surfaces of the fishplates is important for the long term serviceability of this product and will also help the rails to move during expansion and contraction based on weather conditions. To this point, ensure the bolts are tightened to no more than 5Nm of torque.

Monitoring your Britannia Track

The track is designed to be hard wearing and suited to continued outdoor use with exposure to average UK weather. It is however necessary to constantly monitor the track, also look for signs of extensive rust, with particular attention required after periods of prolonged use and exposure to the elements. For more details please refer to the ‘Operating Instructions for laying Britannia Track’ the full version can be found on MRW website.  

Transportation & Storage of Britannia track

Care should be taken when transporting, stacking and storing portable Britannia Track, for more advice please refer to  the ‘Operating Instructions for laying Britannia Track’ the full version can be found on MRW website.