Curve (V Radius) 3.88M / 12'9" FT Radius 5" gauge Portable Jubilee Track Panel
Curve (V Radius) 5 inch gauge Portable Jubilee Track Panel 3.88M [12ft-9in] radius curve. Our ( V ) radius curve is a very tight radius curve and is designed for use in back gardens and confined areas where space is at a premium. These panels allow you to build a railway in almost any confined space with ease. We would not recommend these curves for regular commercial/public use however are ideal for a back garden setup or even for use inside with family and friends.
Full Description
Introduction to MRW Jubilee Track
Dispatch & Delivery
Return & Refunds
Terms
For product technical drawings head over to our Technical tab.
Curve (V Radius) 5 inch gauge Portable Jubilee Track Panel
3.88M [12ft-9in] radius curve
Angle of curve: 22.5 degrees
Total Length: 1.73m
Length with joiners removed: 1.55m
Weight: 6.9kg (approx)
Rail material: Hollow box steel (25x25x2mm)
Sleepers: Solid recycled plastic
Our ( V ) radius curve is a very tight radius curve and is designed for use in back gardens and confined areas where space is at a premium. These panels allow you to build a railway in almost any confined space with ease. We would not recommend these curves for regular commercial/public railway as there is an increased risk of derailments with this tight radius - use in these environments is purely at the operator's discretion. They are however ideal for a back garden setup or even for use inside with family and friends.
As these curves are very tight in nature we do not recommend them for long wheelbase locomotives or stock.
Please note, there is an approximately 2-3 week lead time on this product from payment till dispatch.
This listing is for a single track section, select the number of sections you require from the drop down menu, or contact us for large orders.
5 inch gauge points are also available in this radius so if you are looking for an entire railway ready to run, this is the ideal radius to opt for. For more information on points please contact us directly.
Complete circle / 360 degree loop requires:
[ 16 x 22.5 degree sections ]
U Bend requires / 180 degree turn:
[ 8 x 22.5 degree sections ]
Right angle requires / 90 degree turn:
[ 4 x 22.5 degree sections ]
Assembling and packing Jubilee Track to ensure it is level.
Portable Jubilee Track should be laid on a flat and level surface, packing pieces must be used wherever the ground is uneven, for a complete description of track laying including packing, please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. Jubilee Track, laid in minutes giving hours of fun.
Monitoring your Jubilee Track
We are not aware that any MRW portable Jubilee Tack has suffered a significant amount of wear and tear, however with lots of use you need to constantly monitor the track, also look for signs of rust, with particular attention required after periods of prolonged use. For more details please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. Jubilee Track, laid in minutes giving hours of fun.
Transportation & storage of portable track
Care should be taken when transporting, stacking and storing portable Jubilee Track, for more advice please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website.
