Neptune 7 1/4" Miniature Railway Starter Set - S Radius Loop, Loco and Coach

A complete starter set to create your own miniature railway with a ready to lay loop of 7 1/4" Gauge 4.5M / 14'9" portable track complete with two standard straight sections, alongside an AME Neptune locomotive and driving truck.

 

Our ( S ) radius curve is a very tight radius curve and is designed for temporary use in back gardens and confined areas where space is at a premium. These panels allow you to build a railway in almost any confined space with ease. We would not recommend these curves for regular commercial/public railways as there is an increased risk of derailments with this tight radius - use in these environments is purely at the operator's discretion. They are however ideal for a back garden setup or even for use inside with family and friends. 
 
Our 7 1/4" inch gauge portable points are tried, tested and trusted by hobbyists and commercial operators alike, so if you are looking for an entire railway ready to run, this is an excellent starter package to opt for with option of expansion at a later date. For more information on points please contact us directly.

 

Total Track Weight: 140kg (approx)
Rail material: Hollow box steel (25x25x2mm)
Sleepers: Solid recycled plastic

 

As these curves are very tight in nature we do not recommend them for long wheelbase locomotives or stock. We have successfully used an Abbots Neptune 3 which has a fixed wheelbase of 0-6-0 without any derailments or significant immediate wear on this radius but would warn that regular very heavy daily use  may cause excessive wear to the wheelsets and rail due to the tight nature of the curve.

Create your own miniature railway with a ready to lay loop of 7 1/4" Gauge  4.5M / 14'9" radius loop of track complete with two standard straight sections. This is the perfect starter set to build up from with points soon to be available in this radius.

Track sections may come with joiners removed to keep down postage costs. To attach these you will simply need a 10mm spanner and 4mm allen key are needed to assemble the joiner to the rail. This is only required to be done on first installation; the joiner may remain with the rail throughout use.

A standard track section weighs 6.9kg and requires careful handling to avoid injury. Personal Protective Equipment (PPE)  should be used when laying or moving portable Jubilee Track, for more advice please refer to  the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. 

As standard all MRW Jubilee track panels are widened by 2.3mm [ 3/32" ] this allows for curves to be joined to straights. This widening is within the 7 1/4" gauge standards and should not adversely affect running.

Locomotive

The locomotive is a tried and tested Abbots Model Engineering Neptune 3. An 0-6-0 shunter, suited for tighter curves, the Neptune 3 made right here in the UK offers good value and reliability. Also available are upgrades such as the cranks and rods, which turn as the locomotive progresses and make the engine look more dynamic and convincing. For the full effect, why not add the excellent Mtroniks diesel engine sound system that changes pitch with the locomotive's speed? Only available with a 5% discount in this starter set! For full product information, see our Neptune 3 product listing:-https://www.miniaturerailwayworkshop.com/product-page/neptune-3-ready-to-run-0-6-0-loco-for-miniature-railways

Riding Truck

No locomotive is complete without something to pull. A 5' driving truck is an excellent combination between value, function and manageable size, allowing 3 adults including the driver to sit behind the loco. Available in a number of liveries to match the locomotive. For further information, see the product listing:- https://www.miniaturerailwayworkshop.com/product-page/5-gauge-3ft-guv-ground-level-driving-truck

Package Pricing
7 1/4" Gauge Curve (S Radius)
£86.00 x 20 = £1,720.00
7 1/4" Gauge Straight
£68.00 x  2  = £136.00
Track Panel Tie Bar
£2.00 x 22 = £44.00
Locomotive Ready-to-Run
Neptune (3) x 1 = £2595.00
Couplings
Bar and Pins = £5.50
Riding Truck Ready-to-Run
5' vinyl wrapped riding truck = £720.00
Total (excluding optional extras on locomotive): £4959.48 - including 5% discount on starter set
Diesel Engine Sound System
Optional extra = £420.00
Side Cranks and Rods (Pictured, Red)
Optional extra = £185.00

PLEASE NOTE:-
Batteries are not included in the price of the loco! Please enquire about battery options for your loco. Some images are for demonstration purposes only and do not reflect the exact contents of the starter set.

Assembling and packing Jubilee Track to ensure it is level
Portable Jubilee Track should be laid on a flat and level surface, packing pieces must be used wherever the ground is uneven, for a complete description of track laying including packing, please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website. Jubilee Track, laid in minutes giving hours of fun. 

Monitoring your Jubilee Track

We are not aware that any MRW portable Jubilee Tack has suffered a significant amount of wear and tear, however with lots of use you need to constantly monitor the track, also look for signs of rust, with particular attention required after periods of prolonged use. For more details please refer to the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website.  Jubilee Track, laid in minutes giving hours of fun. 

Transportation & storage of portable track

Care should be taken when transporting, stacking and storing portable Jubilee Track, for more advice please refer to  the ‘Operating Instructions for laying Jubilee Track’ the full version can be found on MRW website.

----- Disclaimer -----
Miniature Railway Workshop ltd can not take responsibility for injury caused with this product, the materials used are of good quality and the design has been made to sound engineering principles although, the responsibility for safe installation and operation is down to the user/installer/owner.