Looking towards the future.

These are unusual times we are all living in, but here at MRW we are always looking to the future. Alongside our current range of products, we are continuing to develop and adapt to our client demands.

Strumpshaw Steam Rally
Looking towards the future.

*** New Product *** Joining piece to connect 16mm high aluminium rail to MRW standard Jubilee track sections.




Following a request form The Billingham Light Railway we have been developing this joining piece so that a permanent rail can be connected to Jubilee portable track.

The Aluminium rail is clamped into position using the plates on each side and can be carefully aligned to ensure a smooth joint. Consideration has been given to the aluminium rail wearing and hence fine adjustment to the height of the rail can be set with a countersunk bolt hidden under the rail.



New Product
Joining piece to connect 16mm high aluminium rail

This is the prototype design and we are planning to have the steel cut in the next few weeks for the real thing. We will then see how well the design matches up to expectations and plan to be adding this product to our website in due course.



CAD drawing
Technical drawing for the prototype panel which was sent to The Billingham Light Railway

The Billingham Light Railway were happy with the design so we are pressing ahead with the manufacturer.


To see our existing Joining Panel for 7 1/4 Gauge Straight Jubilee Portable Track head to: Permanent Joining Panel 7 1/4 Gauge Straight Jubilee Portable Track

48 views0 comments

Recent Posts

See All